Select Digital Panel Meters

Types S1000, S2000, S3000, S4000, S5000, S6000

SIFAM offers an extensive, application based range of Digital Panel Meters that have the quality and versatility to meet the needs of a large number of applications. The Select is an intelligent DIN sized DPM with up to 6 digits and can be easily configured to provide a cost effective solution to specific measurement applications.

Key Features


S1000 Series

Volts and Amps - AC/DC voltage measurement.

Input Display
±0-200mV ±200.00
±0-2V ±2.0000
±0-20V ±20.000
±0-200V ±200.00
±0-500V* ±500

Accuracy 0.05% of full scale DC (0.3% AC)
Accuracy 0.1% of full scale DC (0.3% AC)


S2000 Series

Process - AC/DC Process measurement.

Voltage* Current*
0-1.5V 0-1mA
0-1V 0-10mA
0.5V 0-20mA
0-10V 4-20mA
2-10V 0-50mA
0-100mV 10-50mA

Accuracy 0.05% of full scale DC (0.3% AC) typical.
Accuracy 0.1% of full scale DC (0.4% AC) typical.


S3000 Series

Input Signal Types

Ac signal
Logic input
Open collector NPN, PNP
Magnetic pickup

Input Display
±0-200µA ±200.00
±0-2mA ±2.0000
±0-20mA ±20.00
±0-200mA ±200.00
±0-2A* ±2.0000
±0-5A* ±5.0000

Accuracy 0.1% of full scale DC (0.4% AC)
Accuracy 0.1% of full scale DC (0.4% AC)


S4000 Series

Rate and Frequency - Frequency measurement.

Input Range Display Range
20Hz-200Hz 199.99
20Hz-2kHz 1.9999
200Hz-20kHz 19.999

Accuracy 0.02% of full scale ±1 digit.

Rate Measurement

20Hz-20kHz
Scalable display
Accuracy 0.02% full scale ±1 digit

Input Signal Types

Ac signal
Logic input
Open collector NPN, PNP
Magnetic pickup


S5000 Series

Temperature - RTD Instruments

RTD type Display Range
RTD385 0-1mA
RTD392 0-10mA

Accuracy 0.1% of full scale @ 25°C ±1 digit


S6000 Series

Strain - Strain gauge

Strain
1-3.5mV/V
3.5-6mV/V
6-10mV/V
Excitation
3V, 6V, 10V
Max Current
90mA

Attractive Styling

Can enhance the appearance of your system or products, the meters are 1/8th DIN cut-out with the case being made from V-0 rated materials. The bezel is designed with minimum protrusion, avoiding clumsy system appearance.

Large Clear Display

Facilitates ease of use with data displayed clearly and legibly in the standard red or optional green LED display.

Removable Bezel

In applications requiring infrequent set-up changes, a plain bezel can be used. This 'set and forget' option means access to the instruments is concealed and is only used by, say, service personnel.

Ease & Secure Configuration

For added security, set-up access can be limited. This is achieved using password and/or a removable bezel.

IP66 & NEMA 4 Front as Standard

The Select range was designed for a wide range of environments and provides IP66/NEMA 4 at no extra cost.

Comprehensive Remote Control

Remote instrument access by computer using industry standard RS422 or RS485 serial communications ensures easy system integration.

VAP Series Digital Panel Meters

Digitron's VAP Series offer a range of high accuracy performance panel meters designed for use with pressure transducers, high voltage transducers and current loop sensors.

Features include:

Reliability

All models are subjected to detailed inspection and a rigorous testing programme before being calibrated. All models are also supplied with a 12 month warranty on parts and labour.

A440 Series Current Loop Indicators

Digitron's A440 Series current loop indicators are designed for use with any current loop sensor, which gives out a dc current in the range 0-20mA, or 4-20mA. 0mA or 4mA 'zero' inputs are selectable, with further offset adjustment for sensor calibration (using jumper links). Both instruments give out a nominal excitation voltage of 24V dc and can also be used as repeaters on loops, which are already powered.

  • Two models are available:
The model A445 indicator and the model A448 indicator with single set point.


P440 Series Pressure Indicators

Digitron's P440 Series pressure indicators are designed for use with pressure transducers with a full-scale output 100mV or other strain gauge device.

  • Two models are available
Model P445 indicator and model P448 indicator with single set point.

These instruments give a 10V DC excitation voltage and can be adjusted to give full-scale indication for other than 100mV using jumper links, zero and gain adjustment control.


V440 Series Bridge Transducer Indicators

The V440 series transducer Indicators are designed for use with any 3 terminal transducer which requires a nominal + 24V DC excitation voltage and gives out a signal in the range 0-5V or 0-10V DC (1-6V, 1-11V DC with offset).

  • Two models are available:

Model V445 indicator, and model V448 indicator with single set point each with 2 ranges, 0-5V (1-6VDC with offset). or 0-10V (1-11V DC with offset).

Both instruments give out a nominal excitation voltage of 24V DC.


4000 Series "Slimline" Panel Thermometers

The 4000 Series range of panel thermometers are a comprehensive range of indicators and controllers for use with K, T, and J thermocouples or Pt100 sensors with a unit resolution of 0.1 or 1 degree Celsius. Temperature ranges from - 100?C to 700?C are catered for with an accuracy of +/-0.3%, or better.

Whilst retaining the standard 96 x 48mm DIN front panel and large LED display, instrument depth is just 63mm. Should the need for calibration or servicing occur, the downtime, has been minimised by providing front access to the PCB via the removable front window plus there is the provision of rear plug-in terminals.

All instruments are subjected to detailed inspection and a rigorous testing programme before being calibrated and a 12 month warranty.

4000 Series Applications

Specification

Sensor Type Range Accuracy (15° to 25° C ambient) Thermocouple:
Thermocouple K -50° to 700°C ±0.5% ±1 digit
Thermocouple T -50° to 350°C ±0.5% ±1 digit
Thermocouple J -50° to 625°C ±0.5% ±1 digit
Platinum Resistance:
Pt100 A -99.9° to 199.9°C ±0.2%±0.2°C
Pt100 B -100° to 650°C ±0.2%±1°C
Model No: Model 4501 Model 4504 Model 4801 Model 4804
Function - - Single set point and relay single set point and relay
Sensor Type for ranges as detailed above Thermocouple Platinum Resistance Thermocouple Platinum Resistance
Resolution 1°C 0.1° or 1°C 1°C 0.1° or 1°C
Ambient Operating Temperature 0°-45°C 0°-45°C 0°45°C 0°45°C
Cold Junction Compensation Automatic by precision thermistor   Automatic by precision thermistor -
Sensor Operating Mode - 4- wire constant voltage sensing - 4- wire constant voltage sensing
Display 11.2mm LED 11.2mm LED 11.2mm LED 11.2mm LED
Power Supply 220V/110V 50/60 Hz selectable 220V/110V 50/60 Hz selectable 220V/110V 50/60 Hz selectable 220V/110V 50/60 Hz selectable
Rear Connections Plug-in rear terminal blocks Plug-in rear terminal blocks Plug-in rear terminal blocks Plug-in rear terminal blocks
Output Device     Heavy duty relay Silver Cadmium Oxide Heavy duty relay Silver Cadmium Oxide
      Rating 250 Volts AC, 5 amps resistive load. 30 Volts/DC 5 amps resistive load. Rating 250 Volts AC, 5 amps resistive load. 30 Volts/DC 5 amps resistive load.
Overall Dimensions 96x48x68.1mm 96x48x68.1mm 96x48x68.1mm 96x48x68.1mm
Panel Cutout 92x45mm + 1.0mm-0.0mm 92x45mm + 1.0mm-0.0mm 92x45mm + 1.0mm-0.0mm 92x45mm + 1.0mm-0.0mm

* All quoted accuracies relate to instruments only and do not account for sensor errors.